Driver Asus Striker Extreme BIOS 1301

Striker Extreme BIOS version 1301
1. Update CPU uCode to support new processors
2. Enhance memory compatibility under full load (4 DIMM)
3.

Revise Q-Fan control code
4. Fix system fail to resume from S3 mode via PS/2 keyboard
5. Update NV RAID ROM to 6.9802.
6. Add microcode not found & update fail message support
7. Finetune CPU fan speed too low warning range
8. Use new French translation
9. Modify General Help string.
10.Fixed floppy item value error.
11.Use new Simplified Chinese translation.
12.Use new Japanese translation.
13.Support post message in Japanese
14.Use new German translation.
15.Fixed incorrect CPU Vcore when set to above 1.60V


Features:

CPU

LGA775 socket for Intel Core2 Extreme / Core2 Duo / Pentium Extreme / Pentium D / Pentium 4 / Celeron D Processors
Intel Quad-core CPU Ready
Compatible with Intel 06/05B/05A processors
* Refer to www.asus.com for Intel CPU support list
** Please update the latest BIOS to support Intel 45nm CPU
Chipset

NVIDIA nForce 680i SLI
- Support SLI-Ready Memory Technlogy
Front Side Bus

1333** / 1066 / 800 / 533 MHz
** available when CPU's supporting 1333MHz FSB
Memory

Dual channel memory architecture
4 x DIMM, max. 8GB, DDR2-800/667/533, non-ECC and un-buffered memory
* Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)
SLI-Ready Memory

1200MHz
Expansion Slots

2 x PCI Express x16 slot, support NVIDIA SLI technology, at full x16, x16 speed(blue)
1 x PCI Express x16, at x8 speed(middle)
1 x PCI Express x1
2 x PCI 2.2
Scalable Link Interface (SLIâ„¢)

Support two identical NVIDIA SLI-Ready graphics cards (both at x16 mode)
ASUS PEG Link
Storage

South bridge supports:
- 1 x Ultra DMA 133 / 100 / 66 / 33
- 6 x Serial ATA 3.0Gb/s
- NVIDIA MediaShield RAID supports RAID 0, 1, 0+1, 5 and JBOD span cross Serial ATA drives
Silicon Image 3132 SATA controller supports
- 2 x External Serial ATA 3.0Gb/s port on back I/O (SATA On-the-Go)
LAN

NVIDIA nForce 680i SLI built-in dual Gigabit MAC with external Marvell PHY
Support NVIDIA DualNet technology
High Definition Audio


SupremeFX Audio Card
- ADI 1988B 8-channel High Definition Audio CODEC
- Support Jack-Sensing, Enumeration, Multi-streaming and Jack-Retasking
- Noise Filter
Coaxial, Optical S/PDIF out
DTS Connect
ASUS Array Mic
IEEE 1394a

VIA6308P controller supports 2 x 1394a ports
USB

max. 10 USB2.0/1.1 ports(6 ports at mid-board, 4 ports at back panel)
Overclocking Features

Extreme Tweaker
Intelligent overclocking tools:
- AI NOS (Non-delay Overclocking System)
- AI Overclocking (intelligent CPU frequency tuner)
- ASUS AI Booster Utility
- O.C Profile
Overclocking Protection:
- ASUS C.P.R.(CPU Parameter Recall)
Special Features

LCD Poster
EL I/O
Onboard LED
Onboard Switches: Power / Reset / Clr CMOS
Q-Connector
Q-Fan Plus
ASUS EZ Flash2
ASUS Music Alarm
ASUS MyLogo3
Back Panel I/O Ports

1 x LCD Poster
1 x PS/2 Keyboard port(purple)
1 x PS/2 Mouse port(green)
1 x Optical + 1 x Coaxial S/PDIF Output
2 x External SATA
2 x LAN (RJ45) port
4 x USB 2.0/1.1 ports
1 x IEEE1394a port
1 x onboard LED switch
Internal I/O Connectors

3 x USB 2.0 connectors supports additional 6 USB 2.0 ports
1 x Floppy disk drive connector
1 x IDE connector for two devices
6 x SATA connectors
8 x Fan connector: 1 x CPU / 1 x SPS / 3 x Chassis / 3 x Optional
3 x thermal sensor connector
1 x IEEE1394a connector
1 x S/PDIF output connector
1 x Chassis Intrusion connector
24-pin ATX Power connector
8-pin ATX 12V Power connector
1 x EL I/O Shield Connector
System panel connector
BIOS

8Mb Award BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.3, Multi-Language BIOS
Manageability

WOL by PME, WOR by PME, Chasis Intrusion, PXE
Accessories

SLI bridge
ASUS Array Mic
ASUS Optional Fan
3 in 1 ASUS Q-Connector Kit
UltraDMA 133/100/66 cable
Floppy disk drive cable
SATA cables
SATA power cables
2-port USB2.0 module
IEEE1394a module
EL I/O Shield
Thermal sensor cables
Cable Ties
ROG key ring



We suggest you to use the most newest driver version.


Before install this driver we recommend to set a restore point. This way you can reverse system if the driver is rong.