ASUS P4S8X-MX BIOS 0808

Fix Crash Free fail issue if during erase Flash and power off over 20 Seconds
Fix can't execute Ghost and lead to system crash issue.

Specification
CPU

Socket 478 for Intel Pentium 4/ Celeron
Intel Hyper-Threading Technology ready
Support Intel Prescott CPU
Chipset

SiS 661GX
SiS 964
Front Side Bus

800*/533MHz
*The motherboard runs at FSB800 when in overclock mode.
Memory

2 x 184-pin DIMM Sockets support max. 2GB DDR400**/333 non-ECC DDR SDRAM memory
- support DDR400/333 with FSB533
- support DDR333 with FSB800
**
1. When using an FSB800 CPU with 400MHz DDR memory, the motherboard runs at 333MHz by default.
2. When using an FSB533 CPU with 400MHz DDR memory, the motherboard runs at 400MHz.
Expansion Slots

1 x AGP 8X (1.5V only)
3 x PCI2.2
VGA

SiS Real 256E Graphics
Storage/RAID

SiS 964 South Bridge:
*2 x Serial ATA, RAID 0, RAID 1, JBOD
*2 x UltraDMA 133/100/66/33
Audio

Realtek ALC 655, 6-channel CODEC
S/PDIF out interface
LAN

Integrated 10/100 Mbps LAN controller Realtek PHY
USB

Integrated 8 USB2.0/1.1 ports
Special Features

support S/PDIF out interface
ASUS Crash-Free BIOS2
ASUS EZ Flash
ASUS MyLogo2
Overclocking Features

FSB frequency adjustable with 1MHz step (SFS)
AGP/PCI Asynchronous Mode with FSB
ASUS C.P.R. (CPU Parameter Recall)
Back Panel I/O Ports

1 x Parallel
1 x Serial
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x VGA
1 x 6-channel Audio I/O
4 x USB 2.0/1.1
1 x RJ45
Internal I/O Connectors

2 x USB 2.0 connector support additional 4 USB 2.0 ports
CPU Fan / Chassis Fan connectors
20-pin ATX Power connector
4-pin ATX 12V Power connector
Game / MIDI connector
S/PDIF out connector
CD / AUX audio in
20-pin Panel connector
Front panel audio connector
BIOS

4Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.3, ACPI 2.0, ASUS C.P.R.(CPU Parameter Recall), ASUS CrashFree BIOS2, ASUS EZ Flash, ASUS MyLogo2
Manageability

WfM 2.0,DMI 2.0,WOL by PME,WOR by PME
Support CD

Drivers
ASUS PC Probe
Bundle anti-virus software (OEM version)
ASUS LiveUpdate Utility
Accessories

1 x UltraDMA133/100/66 cable
1 x Serial ATA cable
1 x Serial ATA power cable
1 x FDD cable
User's manual
I/O shield
Form Factor

microATX Form Factor
9.6"x 9.6"(24.5cm x 24.5cm)




It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.