Driver Albatron PX845EV1 Rev:800 Bios R1.02

1.Fixed detect CPU FAN R.P.M error


Motherboard overview:

Feature

Intel Pentium4 Processor (Willamette/Northwood)
Socket 478 with FSB 400/533/800 MHz
(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)
3 DDR200/266/333/400 (DDR333/400 by overclocking) Memory Sockets
6 c

Processor

Socket 478 Intel Pentium Processor (Willamette/Northwood)

FSB / Transport

400/533/800 MHz
(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)

Chipset

North Bridge : Intel 845E
South Bridge : Intel ICH4
Audio Codec : Realtek ALC650 Codec
I/O Chip : Winbond Smart I/O W83627HF


Memory

3 *DDR Sockets
DDR 200/266/333/400 (DDR333/400 by overclocking) NON-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )

Expansion Slots

1 x AGP 4X slot ( 1.

5V only)
5 x PCI slots (PCI 2.2 compliant)

IDE / SATA Connectors

2 ATA66/100 channels, up to 4 ATA 66/100 IDE devices

Onboard I/O Connectors

1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header with fan rotation detection function
2 x System fan headers with fan rotation detectio

I/O via Back Panel

PS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MIC

Power

20-pin ATX power connector, 4-pin ATX 12V power connector

BIOS Feature

2Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer

Hardware Monitoring

3 FAN sensors, CPU/System voltages and temperature monitoring

Special Feature

Zero Jumper Design
Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, V AGP, V Memory
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection c

Certifications

FCC, CE, BSMI

Form Factor

ATX (200mm x 294mm


We suggest you to use the most newest driver version.


Before install this driver we recommend to set a restore point. This way you can reverse system if the driver is rong.